Fields between mirrors
Two conducting mirrors constrain the electromagnetic field between them. Changing their separation changes the attractive force and the work exchanged with the apparatus.
This interactive lesson uses Casimir’s ideal parallel-mirror calculation at zero temperature. The plate area is 1 cm². The drawings expand the nanometre gap so you can inspect it.
- Attractive pull
- 16.1 µNtoward the other plate
- Interaction energy
- −1.61 pJrelative to infinitely separated plates
- Pressure magnitude
- 161 mPaideal, zero-temperature mirrors
Motion is paused to respect your reduced-motion setting.
The surfaces set the boundaries
A conducting surface constrains the electromagnetic field at its face. Changing the spacing changes which normal-mode patterns fit. The plates here are ideal mirrors; their thickness and gap are enlarged so you can see them.
Separation and attraction
Pin a separation, then change the gap. The force grows as 1/d⁴: half the separation gives sixteen times the attraction in this ideal model.
Work over a complete cycle
The Casimir force does work as the plates approach; separating them for another stroke requires work in return.
Predict the force
At 300 nm, you measure a pull. Move to 150 nm. How much stronger is the ideal attraction?
Force and interaction energy
What this says
What this says
Parallel-plate measurements
Casimir derived the ideal parallel-plate attraction in 1948. Bressi, Carugno, Onofrio and Ruoso measured the force between parallel conducting surfaces in 2002. Actual materials, temperature, surface roughness and alignment alter the prediction, so an experimental apparatus needs those corrections.
The few field curves here are a teaching picture of allowed normal-mode shapes. They do not count the complete electromagnetic spectrum or measure an absolute vacuum-energy density. Compare the ideal curve with a measured force at the same gap.
Original papers
- H. B. G. Casimir (1948), On the attraction between two perfectly conducting plates — the ideal geometry and force calculation.
- Bressi and colleagues (2002), Measurement of the Casimir Force between Parallel Metallic Surfaces — a parallel-surface measurement. Source record.
- R. L. Jaffe (2005), The Casimir Effect and the Quantum Vacuum — a calculation of Casimir forces using interactions of charges and currents in matter.